Training & Courses

NPORS – Report of Thorough Examination NPORS Category N019 NPORS – National Plant Operators Registration Scheme AIM This is a Report of Thorough Examination course designed for employees who have a responsibility for issuing, storing, pre-use and in-service inspection, condemning or acquiring lifting equipment and for persons required to carry out thorough examination on lifting accessories, equipment and small plant.
Enquire / Book

NPORS Category N047 NPORS – National Plant Operators Registration Scheme AIM This is a rigging and fleeting loads course designed to suit the requirements of learners who have limited  knowledge of Rigging, fleeting, Lifting and Slinging Techniques. Pre-Requisite No previous experience required, but if intending to work within a construction environment within Rep.
Enquire / Book

Duration:  4 days including 1 day CPCS Theory and Practical Test Stage 1  Day 1-3 Classroom based Max: 8 Persons Stage 2  CITB-Constructions Skills Health, Safety and Environment Managers and Professionals Test (Touch Screen centre located on the premises in Blessington Co. Wicklow from October) Stage 3  CPCS Assessment day Target Delegates: This course is aimed at anyone who is required to plan safe systems of work using lifting equipment.
Enquire / Book

O’Reilly Training Ltd IPAF accredited Mobile Elevated Working Platforms course for candidates to operate an MEWP safely and correctly including pre-use inspection, the causes of instability and emergency procedures.  For scissors boom, boom lift training, scissors and boom safety training courses. Duration of training 1 Day Minimum and maximum class numbers 4 Max Award O’Reilly Training certificate &
Enquire / Book

O’Reilly Training Ltd ALLMI course for candidates to understand and practice the safe use and operation of a Lorry Loader Crane and to understand the need for accident prevention.  Safety Training Courses for  hi ab crane, lorry loader, lorry loader crane Duration of training 1 day Minimum and maximum class numbers 4 max  Duration of certificate ALLMI Card and Certificate (www.allmi.com)  Required Prior Learning Experience required.
Enquire / Book

O’Reilly Training Ltd Rigging and Slinging course for candidates to understand the legislation, methods of rigging and slinging, rigging techniques and the principles of load turning. Duration of training 1 day Minimum and maximum class numbers 6 max Award O’Reilly Training Certificate Duration of certificate 3 years Required Prior Learning None required Course description &
Enquire / Book

O’Reilly Training Ltd CSCS course for experienced operators to demonstrate their competence in the selection of appropriate lifting gear. CSCS safety Training Courses for, banksman, slinger banksman, slinger signaller, slinger and signaller. Duration of training 1 day Minimum and maximum class numbers 4 max Award FETAC /QQI certificate & SOLAS CSCS/QSCS Card Required Prior Learning Six Months Experience Duration of certificate 5 years Course description &
Enquire / Book

O’Reilly Training Ltd tower crane safety training CSCS course for experienced operators to demonstrate their competence through skills, knowledge and attitude in the Safe Use of the Tower Crane. Duration of training 1 day Minimum and maximum class numbers 2 max Award FETAC / QQI Certificate & SOLAS CSCS Card Required Prior Learning Valid Slinger/Signaller SOLAS CSCS Card &
Enquire / Book

O’Reilly Training Ltd course for workers operating in Confined Spaces where knowledge of the associated hazards, selection of equipment, pre entry checks and communication methods are essential to reduce the risk to the health and safety of those operating in the confined space. Duration of training 2 days   Minimum and maximum class numbers Max of 10  
Enquire / Book

O’Reilly Training can offer a range of Forklift Training – Counter Balance, Reach Truck, Narrow Aisle & Power Pallet Truck O’Reilly Training Ltd course for experienced and novice operators to demonstrate their competence through skills, knowledge and attitude in the Safe Use of the Forklift, forktruck, counterbalance forklift training & reach forklift training Duration of training Each course lasts for 1 day for experienced operators (Minimum 6 months operating experience) and 3-5 days for novice operators.
Enquire / Book

Duration of training 1 Day Minimum and maximum class numbers 6 Max Award O’Reilly Training certificate & I.D. card Required Prior Learning None Duration of certificate Valid for 3 years   Course description & General Information AIMS OF COURSE: On completion participants will be able to: Operate an MEWP safely and correctly in accordance with the Manufacturers handbook Clearly understand the causes of instability while operating an MEWP Carry out correctly,
Enquire / Book

O’Reilly Training Ltd Working at Heights course for candidates to recognise the dangers of working at various heights, on flat roofs, ladders and scaffolding and to learn the correct PPE and equipment required under legislation.  The Safety Course includes Harness Safety, working at heights &  ladder safety. Duration of training Half day Minimum and maximum class numbers 10 max Award O’Reilly Training certificate Duration of certificate 3 years Required Prior Learning None Required Course description &
Enquire / Book

O’Reilly Training Ltd Harness Safety Training course for candidates to understand the legislation, accident cause and prevention, working environment and the storage and cleaning of harnesses. Harness Safety at O’Reilly Training Ltd for harness safety training & harness inspection Duration of training Half day Minimum and maximum class numbers 10 max Award O’Reilly Training certificate Duration of certificate 3 years Required Prior Learning None Required Course description &
Enquire / Book

Duration of training 1 day   Minimum and maximum class numbers 6 max   Duration of certificate O’Reilly Training Certificate & ID Card   Required Prior Learning Experience required. If the candidate has very little or no experience we advise they attend the 2 day course   Duration of certificate 3 years  
Enquire / Book

O’Reilly Training Ltd course for experienced and novice operators to demonstrate their competence through skills, knowledge and attitude in the Safe Use of the Gantry Crane. Duration of training 1 day Minimum and maximum class numbers 8 max Award O’Reilly Training certificate & I.D. card Required Prior Learning Experience operating Gantry Crane Duration of certificate 3 years Venue Client’s premises Course description &
Enquire / Book

O’Reilly Training Ltd course for experienced and novice operators to demonstrate their competence through skills, knowledge and attitude in the Safe Use of the Roller/Compactor. Duration of training 1 day Minimum and maximum class numbers 6 max Award O’Reilly Training certificate & I.D. card Required Prior Learning Experience operating Roller Duration of certificate 3 years Course description &
Enquire / Book

Signing, Lighting and Guarding at Roadworks Training Courses for road workers and supervisors to demonstrate their knowledge of the legislation and understanding of traffic management systems including layouts, signs and devices and maintenance of site records. Trainign Course for signing lighting and guarding at roadworks, SLG, roadworks training and cscs sign lighting guarding at roadworks.   Duration of training 3 days  
Enquire / Book

Duration of training 1 day   Minimum and maximum class numbers Classes can vary from 4 to 20 participants   Award FETAC / QQI Certificate & SOLAS CSCS Card   Duration of certificate 5 years   Required Prior Learnin None Required   Course description & General Information The contents of this course includes Legislation in relation to Roadworks Signing Lighting and Guarding at Roadworks Safety in Excavation Plant and Equipment Materials  
Enquire / Book

O’Reilly Training Ltd Manual Handling Training Courses Ireland for all employees to be aware of the legislation and the hazards associated with lifting, the use of equipment and best practice in the safe handling of loads to reduce risk and prevent injury. Duration of training 4 hours   Minimum and maximum class numbers Classes can vary from 2 to 12 learners.
Enquire / Book

O’Reilly Training Ltd Abrasive Wheel Training Courses for all employees to be aware of the legislation and the hazards associated the use of Abrasive Wheels, correct PPE and storage and wheel selection, mounting and markings to reduce risk and prevent injury.   Duration of training 4 hours   Minimum and maximum class numbers Classes can vary from 2 to 12 learners.
Enquire / Book

O’Reilly Training Ltd Safety Representative course for beginner or experienced learners to demonstrate their competence through skills, knowledge and attitude as a Safety Representative through an understanding of legislation, fire safety management, reporting procedures, safe systems of work and emergency procedures. Duration of training 2 days Minimum and maximum class numbers 10 max Award O’Reilly Training Certificate Duration of certificate 2 years Required Prior Learning None required – this course is for anyone considering the position of Safety Representative in the workplace.
Enquire / Book

O’Reilly Training Ltd CSCS course for operators to demonstrate their knowledge of the legislation where underground services may present a hazard to excavation works and complete risk assessments prior to the commencement of underground works. For all your safety training for location of underground services, LUGS & LUGS training   Duration of training 2 days   Minimum and maximum class numbers Classes can vary up to 8 learners.
Enquire / Book

O’Reilly Training Ltd Remote Controlled Self Erecting Crane CSCS course for experienced operators to demonstrate their competence through skills, knowledge and attitude in the Safe Use of the Remote Controlled Self Erecting Crane. Duration of training 1 day Minimum and maximum class numbers 3 max Award FETAC / QQI Certificate & SOLAS CSCS Card Required Prior Learning Valid Slinger/Signaller SOLAS CSCS Card &
Enquire / Book

O’Reilly Training Ltd CSCS course for experienced operators to demonstrate their competence through skills, knowledge and attitude in the Safe Use of the Crawler Crane. Duration of training 1 day Minimum and maximum class numbers 2 max Award FETAC / QQI Certificate & SOLAS CSCS Card Required Prior Learning Valid Slinger/Signaller SOLAS CSCS Card &
Enquire / Book

O’Reilly Training Ltd CSCS course for experienced operators to demonstrate their competence through skills, knowledge and attitude in the Safe Use of the Mobile Crane. Safety training for mobile crane & crane training. Duration of training 1 day Minimum and maximum class numbers 2 max Award FETAC / QQI Certificate & SOLAS CSCS Card Required Prior Learning Valid Slinger/Signaller SOLAS CSCS Card &
Enquire / Book

O’Reilly Training Ltd CSCS course for experienced operators to demonstrate their competence through skills, knowledge and attitude in the Safe Use of the 360 Excavator or 360 Digger. Duration of training 1 day   Minimum and maximum class numbers 3 max   Award FETAC / QQI Certificate & SOLAS CSCS/QSCS Card   Required Prior Learning Six months previous experience  
Enquire / Book

O’Reilly Training Ltd Excavator Safety training Courses CSCS for experienced operators to demonstrate their competence through skills, knowledge and attitude in the Safe Use of the 180 Excavator or 180 Digger.   Duration of training 1 day   Minimum and maximum class numbers 3 max   Award FETAC / QQI Certificate & SOLAS CSCS/QSCS Card  
Enquire / Book

O’Reilly Training Ltd CSCS course for experienced operators to demonstrate their competence through skills, knowledge and attitude in the Safe Use of the Mini Excavator or Mini Digger. For Safety Training for  mini excavator & mini diggers Duration of training 1 day   Minimum and maximum class numbers 3 max   Award FETAC / QQI certificate &
Enquire / Book

O’Reilly Training Ltd CSCS Safety Training course for experienced operators to demonstrate their competence through skills, knowledge and attitude in the Safe Use of the Telescopic Handler or Teleporter for telescopic handler, teleporter, telehandler, cscs teleporter.   Duration of training 1 day Minimum and maximum class numbers 3 max Award FETAC / QQI certificate &
Enquire / Book

O’Reilly Training Ltd First Aid course for beginner or experienced learners to demonstrate their competence through skills, knowledge and attitude in the use of First Aid techniques in line with legislation. First Aid Safety at O’Reilly Training Ltd for all your safety training, first aid training, OFA, occupational first aid training, defib training & CPR training Duration of training 3 days Minimum and maximum class numbers 10 max Award FETAC Level 5 Duration of certificate Learners must undertake refresher training within 2 years.
Enquire / Book

O’Reilly Training Ltd First Aid course for beginner or experienced learners to demonstrate their competence through skills, knowledge and attitude in the use of First Aid techniques in line with legislation. Duration of training 1 day Minimum and maximum class numbers 10 max Award O’Reilly Training certificate Duration of certificate 2 years Required Prior Learning None Required – for anyone with a general interest in First Aid Training Course description &
Enquire / Book

O’Reilly Training Ltd CSCS course for experienced operators to demonstrate their competence through skills, knowledge and attitude in the Safe Use of the Articulated Dump Truck, articulated dumper, artic dumpers, cscs artic dumper safety training. Duration of training 1 day   Minimum and maximum class numbers 4 max   Award FETAC / QQI Certificate &
Enquire / Book

O’Reilly Training Ltd  Site Dumper Operator Safety Training Course CSCS course for experienced operators to demonstrate their competence through skills, knowledge and attitude in the Safe Use of the Site Dumper. Duration of training 1 day   Minimum and maximum class numbers 4 max   Award FETAC / QQI Certificate & SOLAS CSCS/QSCS Card  
Enquire / Book

Scaffolding Training Courses by O’Reilly Training Ltd CSCS course for operators to learn how to erect and dismantle a basic system scaffold safely in accordance with legislation and the manufacturer’s instructions for that type of scaffold.   Duration of training 7 days   Minimum and maximum class numbers Min 3, Max 12   Award FETAC / QQI Certificate &
Enquire / Book

O’Reilly Training Ltd CSCS course for operators to learn how to erect and dismantle mobile towers safely and in accordance with legislation and the manufacturer’s instructions. O’Reilly Training safety training, for mobile access tower, mobile tower training, scaffolding training, allied tower training, cscs mobile tower, scaffolding safety training, safety training courses   Duration of training 1 day for experienced operators 2 days for inexperienced operators Minimum and maximum class numbers Classes can vary up to 8 learners.
Enquire / Book