Safety for All

NPORS Category N047

NPORS – National Plant Operators Registration Scheme

AIM
This is a rigging and fleeting loads course designed to suit the requirements of learners who have limited  knowledge of Rigging, fleeting, Lifting and Slinging Techniques.

Pre-Requisite
No previous experience required, but if intending to work within a construction environment within Rep. of Ireland a SOLAS CSCS Slinger Signaller card will be required on such sites.

Course Duration
3 days.

Maximum Number
6 persons.

Training Aids
Lecture notes, audio visual presentation and specific items of rigging equipment.

Assessment
Written and practical test.

Certification
On successful completion of the course candidates will receive an NPORS  ID Card & certificate.

Additional Information
Meeting the needs and expectations of service users is of the highest priority to our staff. Therefore if you have any concerns or wish to make a comment about the service please contact: oreillytraining@gmail.com

 

COURSE OBJECTIVES

On completion of this course the learner will be capable of:

  • Being aware of the statutory requirements, regulations and approved codes of practices regarding rigging equipment together with the learners obligations to Site Safety
  • Identifying basic equipment used in rigging
  • Using basic items of rigging equipment safely and effectively
  • Follow lift plans by selecting and using the correct equipment for the task
  • Inspection and use of different types of lifting equipment
  • Calculations required in rigging to include weight calculation, centre of gravity calculation, required angles, how to use sling charts
  • Lifting safely both out of balance loads, balanced loads and tandem lifting.

COURSE SYLLABUS

  • Rigging principles and terminology
  • Relevant legislation and ACOPs
  • Safe systems of work
  • Risk assessment, planning and control of lifting operations
  • Ensure the area is suitable for lifting activities
  • Lifting equipment pre and post use inspection, including certification
  • Safe and correct use of different types of lifting equipment
  • Selection of the appropriate lifting accessories for different types of loads
  • Lifting accessories and their applications
  • Sling various loads including balanced, unbalance and loose
  • Equipment identification and selection
  • Weight identification, different ways to calculate the loads weight
  • Carry out lifts to given instructions
  • Placement of and setting down loads
  • Disconnection of lifting accessories from the load
  • Use of recommended hand signals and radios
  • Keep within safe working parameters
  • Awareness of crane operating principles
  • Awareness of conflicting activities
  • Environmental factors that could influence lifting operations
  • Correct procedure for the storage of lifting equipment
  • Awareness of manual handling
  • Appreciation of dynamic factors
  • Typing knots, bends and hitches – their uses and applications
  • Typical types of lifting equipment and accessories that the candidate would use will include:
    • Chain slings                                                                                                                                       Beam Clamps
    • Wire rope slings                                                                                                                               Beam trolleys
    • Fibre slings                                                                                                                                        Pallet Trucks
    • Shackles                                                                                                                                             Skates
    • Eyebolts                                                                                                                                             Pullifts
    • Master links                                                                                                                                      Jacks
    • Chainblocks                                                                                                                                       Tirfors & Tirfor wires

                                                               Practical Assessment and Written Examination

November 7, 2018

NPORS – Rigging and Fleeting Loads Course

NPORS Category N047 NPORS – National Plant Operators Registration Scheme AIM This is a rigging and fleeting loads course designed to suit the requirements of learners who have limited  knowledge of Rigging, fleeting, Lifting and Slinging Techniques. Pre-Requisite No previous experience required, but if intending to work within a construction environment within Rep.
June 9, 2016
Hi Ab

Lorry Loader Crane (Hi-Ab) ALLMI

O’Reilly Training Ltd ALLMI course for candidates to understand and practice the safe use and operation of a Lorry Loader Crane and to understand the need for accident prevention.  Safety Training Courses for  hi ab crane, lorry loader, lorry loader crane Duration of training 1 day Minimum and maximum class numbers 4 max  Duration of certificate ALLMI Card and Certificate (www.allmi.com)  Required Prior Learning Experience required.
June 9, 2016

Rigging & Slinging Training Courses

O’Reilly Training Ltd Rigging and Slinging course for candidates to understand the legislation, methods of rigging and slinging, rigging techniques and the principles of load turning. Duration of training 1 day Minimum and maximum class numbers 6 max Award O’Reilly Training Certificate Duration of certificate 3 years Required Prior Learning None required Course description &
June 7, 2016

Forklift Training Courses Ireland

O’Reilly Training can offer a range of Forklift Training – Counter Balance, Reach Truck, Narrow Aisle & Power Pallet Truck O’Reilly Training Ltd course for experienced and novice operators to demonstrate their competence through skills, knowledge and attitude in the Safe Use of the Forklift, forktruck, counterbalance forklift training & reach forklift training Duration of training Each course lasts for 1 day for experienced operators (Minimum 6 months operating experience) and 3-5 days for novice operators.
June 9, 2016

Working at Heights Training Course

O’Reilly Training Ltd Working at Heights course for candidates to recognise the dangers of working at various heights, on flat roofs, ladders and scaffolding and to learn the correct PPE and equipment required under legislation.  The Safety Course includes Harness Safety, working at heights &  ladder safety. Duration of training Half day Minimum and maximum class numbers 10 max Award O’Reilly Training certificate Duration of certificate 3 years Required Prior Learning None Required Course description &
June 9, 2016

Harness Safety Training

O’Reilly Training Ltd Harness Safety Training course for candidates to understand the legislation, accident cause and prevention, working environment and the storage and cleaning of harnesses. Harness Safety at O’Reilly Training Ltd for harness safety training & harness inspection Duration of training Half day Minimum and maximum class numbers 10 max Award O’Reilly Training certificate Duration of certificate 3 years Required Prior Learning None Required Course description &
June 9, 2016
IMG_2298

Lorry Loader Crane (Hi-Ab)

Duration of training 1 day   Minimum and maximum class numbers 6 max   Duration of certificate O’Reilly Training Certificate & ID Card   Required Prior Learning Experience required. If the candidate has very little or no experience we advise they attend the 2 day course   Duration of certificate 3 years  
June 9, 2016

Gantry Crane Operator Training Ireland

O’Reilly Training Ltd course for experienced and novice operators to demonstrate their competence through skills, knowledge and attitude in the Safe Use of the Gantry Crane. Duration of training 1 day Minimum and maximum class numbers 8 max Award O’Reilly Training certificate & I.D. card Required Prior Learning Experience operating Gantry Crane Duration of certificate 3 years Venue Client’s premises Course description &
June 9, 2016

Ride On Roller / Compactor Training

O’Reilly Training Ltd course for experienced and novice operators to demonstrate their competence through skills, knowledge and attitude in the Safe Use of the Roller/Compactor. Duration of training 1 day Minimum and maximum class numbers 6 max Award O’Reilly Training certificate & I.D. card Required Prior Learning Experience operating Roller Duration of certificate 3 years Course description &
June 9, 2016

Manual Handling Training Courses Ireland

O’Reilly Training Ltd Manual Handling Training Courses Ireland for all employees to be aware of the legislation and the hazards associated with lifting, the use of equipment and best practice in the safe handling of loads to reduce risk and prevent injury. Duration of training 4 hours   Minimum and maximum class numbers Classes can vary from 2 to 12 learners.
June 9, 2016

Abrasive Wheel Training Courses

O’Reilly Training Ltd Abrasive Wheel Training Courses for all employees to be aware of the legislation and the hazards associated the use of Abrasive Wheels, correct PPE and storage and wheel selection, mounting and markings to reduce risk and prevent injury.   Duration of training 4 hours   Minimum and maximum class numbers Classes can vary from 2 to 12 learners.
June 9, 2016

Safety Representative Training Course

O’Reilly Training Ltd Safety Representative course for beginner or experienced learners to demonstrate their competence through skills, knowledge and attitude as a Safety Representative through an understanding of legislation, fire safety management, reporting procedures, safe systems of work and emergency procedures. Duration of training 2 days Minimum and maximum class numbers 10 max Award O’Reilly Training Certificate Duration of certificate 2 years Required Prior Learning None required – this course is for anyone considering the position of Safety Representative in the workplace.
June 9, 2016

Occupational First Aid Training Course – Fetac 5

O’Reilly Training Ltd First Aid course for beginner or experienced learners to demonstrate their competence through skills, knowledge and attitude in the use of First Aid techniques in line with legislation. First Aid Safety at O’Reilly Training Ltd for all your safety training, first aid training, OFA, occupational first aid training, defib training & CPR training Duration of training 3 days Minimum and maximum class numbers 10 max Award FETAC Level 5 Duration of certificate Learners must undertake refresher training within 2 years.
June 9, 2016

Basic First Aid Training Courses Ireland

O’Reilly Training Ltd First Aid course for beginner or experienced learners to demonstrate their competence through skills, knowledge and attitude in the use of First Aid techniques in line with legislation. Duration of training 1 day Minimum and maximum class numbers 10 max Award O’Reilly Training certificate Duration of certificate 2 years Required Prior Learning None Required – for anyone with a general interest in First Aid Training Course description &
June 9, 2016
IMG_2390

Safe Pass Training Courses Ireland

SOLAS/FAS CSCS course for operators to learn the basic health and safety risks associated with working on any type of site in order to avoid injury to themselves or others in the workplace. O’Reilly Training Ltd FAS approved safety training, for your safe pass training, safe pass course Ireland Duration of training The course lasts for 1 day.